Package Contents:
- 1 Rocket Boom Bubble Gun
- 1 Bubble solution bottle
- 2 AA batteries (not included)
Assembly Instructions:
- Install Batteries:
- Open the battery compartment located on the handle of the bubble gun.
- Insert 2 AA batteries, ensuring the positive and negative ends match the markings inside the compartment.
- Close the compartment securely.
- Attach Bubble Solution:
- Shake the bubble solution bottle well before use.
- Remove the cap from the bubble solution bottle.
- Insert the bubble solution bottle into the receptacle at the bottom of the gun. Make sure it is snug and secure.
Operating Instructions:
- Turn On the Gun:
- Locate the on/off switch on the side of the gun. Slide it to the ‘on’ position.
- The gun will begin to blow air, and bubbles should start forming immediately.
- Creating Bubbles:
- Aim the gun upwards or in a safe direction away from faces and animals.
- Press the trigger to generate a steady stream of bubbles. Release the trigger to stop.
- For continuous bubbles, hold the trigger down as you move around.
Safety Precautions:
- Do not aim the bubble gun at eyes or faces.
- Use only the bubble solution provided or recommended by the manufacturer to avoid damaging the bubble gun.
- Remove batteries when the bubble gun is not in use for extended periods.
Maintenance:
- Wipe the gun with a damp cloth after use to remove any bubble residue.
- Do not submerge the gun in water.
- If the gun stops producing bubbles, check to ensure the bubble solution bottle is not empty and that the nozzle is not clogged.
Troubleshooting:
- Gun does not produce bubbles: Check if there’s enough bubble solution and that the batteries are properly installed and not depleted.
- Weak bubble output: Ensure the bubble solution is full and the nozzle is clear of obstructions. Consider replacing the batteries if performance does not improve.
Thank you for choosing the Rocket Boom Bubble Gun. Enjoy your bubbly fun!